
为何建议进行此手术¶
Mater Private Hospital Rockhampton 的上肢外科医生 Kieran Hirpara 医生会从适合您病情的微创方案开始。对于肩部疼痛性钙质沉积,这包括物理治疗和抗炎药物、滑囊内类固醇注射、超声引导下对沉积物进行穿刺冲洗(barbotage)以及冲击波疗法。患者通常由全科医生(GP)转诊至我们的诊所;如果理疗师建议您就诊,您仍需获得全科医生的转诊才能符合 Medicare 报销资格。当这些治疗未能给您带来足够缓解时,我们才会考虑此手术。
此手术是一种微创(锁孔)手术,用于清除沉积在您某条肩袖肌腱内的钙质沉积物。这些沉积物会引起持续的疼痛和僵硬,可能持续数月甚至数年。清除沉积物的目的是减轻您的疼痛,让您的肩部重新恢复正常的活动和功能。接受此手术的大多数人对结果感到满意,在一组研究对象中报告的满意度为 93%。只有在我们一致认为沉积物是您肩部仍然疼痛的原因时,我们才会建议手术。
术前¶
手术前,您需要做一些影像学检查来规划手术。通常是X光和超声检查,超声能清楚显示钙质沉积物和肌腱,有时还需要做磁共振成像(MRI)检查。大多数人不需要其他检查。如果您有其他基础疾病,可能需要进行血液检查或由麻醉师进行评估。
在手术前的几周内,请继续使用对您有帮助的治疗,并遵照我们诊所关于您用药的任何指示。您需要在手术前七小时内禁食禁水,以便在手术进展比计划快时,手术排程能够按时进行。请安排他人驾车送您回家,因为您将无法自己驾车。请携带一份您目前正在服用的药物清单,并穿着宽松舒适、方便更换的衣物。
手术当天¶
手术当天,您需要到医院的手术入院单元报到。您将在那里办理入院手续并进行术前准备。本手术在全身麻醉联合区域神经阻滞下进行。手术期间您将完全处于睡眠状态,而神经阻滞(在您醒来之前注射药物,麻醉支配手臂的神经)可在术后最初的 12 至 24 小时内缓解疼痛。麻醉师会在手术前与您见面,并向您详细说明这两部分。
随后,您将被带入手术室进行手术。手术结束后,您将在复苏区苏醒。护士会在麻醉作用消退期间在那里监护您。待您情况稳定后,根据手术类型及恢复情况,您将被转入病房或出院回家。
手术内容¶
这是一种微创(锁孔)手术,通过在肩部周围不同位置(包括后方一处)做的几个小切口进行。外科医生会通过其中一个切口置入一个小摄像头,以便在屏幕上观察您肩部内部的情况。手术首先会检查肩关节本身,在处理肌腱之前排查是否存在其他问题。
钙质沉积物位于您的某条肩袖肌腱内。肩袖是一组固定肩关节并带动手臂活动的肌腱。找到沉积物可能需要一些细致的操作。外科医生通常会用细针探查肌腱来定位它,有时会在术中借助超声。找到后,便清除沉积物,并清理发炎的滑囊(覆盖在肌腱上方的一层薄薄的组织垫),以便清楚地看到肌腱。
清除沉积物后,肌腱上可能会留下一个缺口。如果缺口较大,或发现有撕裂,外科医生会用缝线修复肌腱,并在需要时使用骨内的小型锚钉来固定缝线。是否进行修复是在手术中决定的,取决于清除钙质后您肌腱的状况。整个过程的目标是在不切除健康肌腱的前提下,尽可能多地清除沉积物。
操作完成后,用缝线关闭小切口并覆盖敷料。您醒来时手臂会佩戴吊带。如果您的肌腱没有进行修复,吊带是为了舒适,您需要佩戴最多四周。如果您的肌腱进行了修复,吊带的使用和恢复过程将遵循肩袖修复术较慢的康复方案。
术后¶
大多数患者在此手术后会在医院住一晚,但也有些人可以当天回家。您将在复苏区醒来,手臂佩戴吊带,护士会在麻醉作用消退期间照看您。神经阻滞作用消退后,您的肩部可能会感到疼痛;疼痛的缓解往往是缓慢且起伏不定的:大部分改善发生在三至六个月内,有些人需要长达一年。我们通常保留敷料约10天;除非我们另行通知,否则请勿提前拆除。我们会在复诊时为您更换或拆除敷料。锻炼和洗澡时可以取下吊带。最初的24小时内应有人陪伴您。如果您出现发热、伤口周围发红并扩散、伤口有液体或脓液渗出,或服用止痛药后疼痛仍不断加重,请当天致电诊所。
恢复¶
最初几天,您的肩部会感到疼痛和肿胀。手术时的神经阻滞作用会消退,因此疼痛在减轻之前会先加重。在最初几天里,休息、冰袋和医生开的止痛药都会有帮助。在复诊之前请保留敷料,锻炼和洗澡时请取下吊带。
术后不久,您的物理治疗师就会开始指导您的锻炼。锻炼从轻柔的动作开始,并根据您肩部的情况逐步加强。如果您的肌腱进行了修复,您的恢复将遵循肩袖修复术较慢的康复方案,因此您的物理治疗师会以不同的节奏安排。术后至少六周内不得驾驶,而且只有在外科医生确认可以之后才能驾驶。详情请参阅上肢手术后的驾驶。
改善是逐步且起伏不定的。疼痛和活动能力的大部分改善发生在最初几个月内,肩部会在长达一年的时间里持续好转。一旦肿胀消退、活动能力恢复,家中的日常事务就会变得更容易。在外科医生确认可以之后(通常在六周复诊时),您就可以恢复伏案工作和轻度日常事务。体力劳动、体育运动和健身要等到之后,在您的肩部足够有力、外科医生对您的进展感到满意时才能恢复。
恢复情况因人而异。您的时间表可能有所不同,您的外科医生和物理治疗师将为您提供指导。
可能出现的问题¶
大多数患者恢复良好,但偶尔可能会出现问题。您的外科医生和医疗团队会密切监测您的状况,以便尽早发现任何问题。
此手术后最常见的问题是僵硬,有时称为冻结肩。您的肩部会感觉发紧,向任何方向活动都越来越困难。随着时间一周周过去,向上够、向背后够或向侧面伸展变得越来越难,而不是越来越容易。如果您的肩部越来越僵硬而不是逐渐放松,请致电诊所,以便我们进行评估,并在需要时尽早开始治疗。
有些人会发现肩部疼痛和僵硬持续的时间比预期的长。这可能表现为一种无法缓解的深部酸痛,活动仍然受限。请在下次复诊时提出,因为可能需要进一步评估。
如果您的肌腱在手术中进行了修复,恢复所需时间会更长,也更容易出现僵硬。您的物理治疗师会相应地安排您的锻炼节奏。
如果您想了解具体数据,本页的并发症表格列出了典型发生率。
何时联系我们¶
此手术后的大多数问题都很轻微,但有些需要及时处理。如果您出现小腿肿胀或疼痛、呼吸急促或胸痛,请前往急诊科,因为这些可能是血栓的征兆。如果您出现发热、伤口周围发红并扩散、伤口有液体或脓液渗出,或服用止痛药后疼痛仍不断加重,请当天致电诊所。在最初24小时内,神经阻滞消退期间手臂出现麻木或无力是正常的。神经阻滞作用消退后,如果您的手臂或手仍然麻木,或无法活动,请致电诊所。如果您无法联系到诊所,请前往离您最近的急诊科。
深入探讨¶
Advanced reading: the deeper science (optional)
本节内容超出了您自身治疗决策所需的范围。这项手术值得额外阅读,因为过去与它一同进行的操作——从肩峰上削除骨质——后来被证明毫无益处;而且仍未解决的问题(应清除多少钙质,以及之后是否应修复肌腱)至今仍有争议。
沉积物为何会疼,以及为何手术是例外¶
钙化性肌腱病是活体肌腱中由细胞驱动的过程:钙质先沉积下来,而在大多数人中,之后会被身体分解和清除,随后肌腱会自行重建 [1]。在钙质形成期间,肩部可能不痛或只是轻度酸痛。剧烈的突发疼痛通常出现在身体开始分解沉积物时 [1]。这就是为什么最初的治疗要么是等待这种吸收过程完成,要么是加快这一过程;也是为什么手术只留给那些对这些治疗无效、长期疼痛的沉积物。
当非手术方案失败后,清除沉积物对大多数人有效。在各项随机试验中,穿刺治疗后(在 10 分制量表上改善 4.8 分)与手术后(4.7 分)的平均疼痛改善相近。手术组肩关节功能评分的提高更大(Constant 评分提高 38 分,而穿刺后为 22 分)[2]。这些是从不同试验中汇总的各治疗组内平均值,而不是直接的头对头比较,而且接受手术的人通常已经尝试过穿刺治疗。
被放弃的减压术¶
多年来,清除沉积物时会同时进行肩峰下减压:基于肌腱受到挤压的理论,从肩峰下表面削除骨质。如今有三项比较研究不支持这种做法。
- 在一项纳入 80 名患者的随机试验中,加做减压术对一年时的疼痛、功能或生活质量没有影响 [3]。
- 在一项比较性病例系列中,仅清除沉积物的人平均在 11 周内恢复无痛、不受限制的活动,而加做减压术的人则需要 18 周。在六周内,仅清除组中近 60% 的人恢复了不受限制的活动,而加做减压术的为 20% [4]。
- 在一项纳入 69 名患者的三组随机试验中,仅做减压而保留沉积物,六周时的疼痛缓解较差,并且需要更多后续治疗(9 次进一步治疗,大多为可的松注射,而清除加减压术后为 1 次)。清除沉积物无论是否加做减压术,效果都同样好 [5]。
一组未做减压术的 105 例肩部病例报告,无论肩峰形状如何,疼痛都能迅速缓解 [6]。问题在于沉积物;其上方的骨头通常不是问题所在。这就是本页介绍的手术不包括减压术的原因。
全部清除,还是清除大部分?¶
这确实存在分歧。在一组病例中,二至五年时的肩部评分随残留钙质的增多而降低,作者因此建议完全清除 [7]。另一些人则采取相反的做法来保护肌腱。在一组刻意保留肌腱的病例中,99 例肩部中有 17 例留有少量残余(平均约为原沉积物大小的 58%)。这些人的效果并不更差,而且到随访时残余物已被吸收 [8]。最近一组 99 例肩部病例也得出了同样的结论:留有残余的 20 例肩部,其结果与完全清除者相似 [9]。在实际操作中,目标是在不切除健康肌腱的前提下尽可能多地清除。
修复缺口,还是保留不动?¶
清除沉积物会在肌腱内留下缺损。是否缝合它是第二个悬而未决的问题。
- 不修复:在 99 例肩部中,无论沉积物的大小或位置如何,结果都良好。在之后接受扫描的 29 例肩部中,79% 已愈合,而残留小缺损的 6 例,其评分与其余患者一样好 [9]。一组 54 例未修复的肩部随访至少七年,报告 3.7% 后来发展为肩袖撕裂 [10]。
- 修复:在一项 44 名患者的比较中,缺损得到修复的患者临床评分更好,MRI 显示 80% 修复后的肩部肌腱外观正常。仅清创组的肌腱大多完整,但信号异常 [11]。
代价在于恢复。修复后手臂需要更长时间的保护。在一组所有缺损都进行了修复的病例中,35 名患者中有 10 名(29%)出现肩部僵硬,在三至九个月内缓解 [12]。这就是为什么是否修复要在手术中决定——针对较大的缺损或发现的撕裂——而不是常规进行。
僵硬,以及需要时间的恢复¶
冻结肩是此手术最常见的并发症。在 340 例肩部中,12% 出现了冻结肩 [13]。在未做减压术的病例系列中,发生率为 2.9% [6]。
恢复是起伏不定的。在一组病例中,无论从事何种工作,78% 的患者在六周内恢复工作。然而,疼痛降至最低水平的时间,仅 31% 在三个月时,17% 在六个月时,20% 在九个月时,28% 在一年时 [14]。感觉沉积物已经消失,并不等于那一周就感觉好转了;三个月时肩部仍然疼痛通常属于正常进程,而不是治疗失败。
这对您的决定意味着什么¶
- 大多数沉积物无需手术即可消退。手术是针对那些经过充分的非手术治疗尝试后仍未消退的沉积物。
- 清除沉积物就是手术本身。从肩峰削除骨质会延长恢复时间,却不会改善结果。
- 是否修复肌腱取决于术中发现。修复能保护肌腱,但会减慢恢复并增加僵硬的风险。
- 改善需要以月而不是以周来计算,有些人需要长达一年。
参考文献¶
[1] Uhthoff HK, Loehr JW. Calcific Tendinopathy of the Rotator Cuff: Pathogenesis, Diagnosis, and Management. J Am Acad Orthop Surg. 1997;5(4):183-91. https://doi.org/10.5435/00124635-199707000-00001
[2] Angileri HS, Gohal C, Comeau-Gauthier M, Owen MM, Shanmugaraj A, Terry MA, et al. Chronic calcific tendonitis of the rotator cuff: a systematic review and meta-analysis of randomized controlled trials comparing operative and nonoperative interventions. J Shoulder Elbow Surg. 2023;32(8):1746-60. https://doi.org/10.1016/j.jse.2023.03.017
[3] Clement ND, Watts AC, Phillips C, McBirnie JM. Short-Term Outcome After Arthroscopic Bursectomy Debridement of Rotator Cuff Calcific Tendonopathy With and Without Subacromial Decompression: A Prospective Randomized Controlled Trial. Arthroscopy. 2015;31(9):1680-7. https://doi.org/10.1016/j.arthro.2015.05.015
[4] Marder RA, Heiden EA, Kim S. Calcific tendonitis of the shoulder: is subacromial decompression in combination with removal of the calcific deposit beneficial? J Shoulder Elbow Surg. 2011;20(6):955-60. https://doi.org/10.1016/j.jse.2010.10.038
[5] Verstraelen F, Schotanus M, Klemann-Harings S, Lambers Heerspink O, Jansen E. Comparison of clinical and radiological outcomes after three different surgical treatments for resistant calcifying tendinitis of the shoulder: a short-term randomized controlled trial. J Orthop Surg Res. 2022;17(1):480. https://doi.org/10.1186/s13018-022-03373-1
[6] Maier D, Jaeger M, Izadpanah K, Köstler W, Bischofberger AK, Südkamp NP, et al. Arthroscopic Removal of Chronic Symptomatic Calcifications of the Supraspinatus Tendon Without Acromioplasty. Orthop J Sports Med. 2014;2(5):2325967114533646. https://doi.org/10.1177/2325967114533646
[7] Porcellini G, Paladini P, Campi F, Paganelli M. Arthroscopic treatment of calcifying tendinitis of the shoulder: Clinical and ultrasonographic follow-up findings at two to five years. J Shoulder Elbow Surg. 2004;13(5):503-8. https://doi.org/10.1016/j.jse.2004.04.001
[8] Maier D, Jaeger M, Izadpanah K, Bornebusch L, Suedkamp NP, Ogon P. Rotator Cuff Preservation in Arthroscopic Treatment of Calcific Tendinitis. Arthroscopy. 2013;29(5):824-31. https://doi.org/10.1016/j.arthro.2013.01.031
[9] Youn S, Rhee SM, Cho S, Kim C, Lee J, Rhee YG. Arthroscopic decompression of calcific tendinitis without cuff repair. Bone Joint J. 2023;105-B(6):663-7. https://doi.org/10.1302/0301-620X.105B6.BJJ-2022-1137.R1
[10] El Shewy MT. Arthroscopic removal of calcium deposits of the rotator cuff: a 7-year follow-up. Am J Sports Med. 2011;39(6):1302-5. https://doi.org/10.1177/0363546510396320
[11] Lorbach O, Haupert A, Berger C, Brockmeyer M. Clinical and Structural Results of Rotator Cuff Repair Compared With Rotator Cuff Debridement in Arthroscopic Treatment of Calcifying Tendinitis of the Shoulder. Am J Sports Med. 2021;49(12):3196-201. https://doi.org/10.1177/03635465211037690
[12] Yoo JC, Park WH, Koh KH, Kim SM. Arthroscopic treatment of chronic calcific tendinitis with complete removal and rotator cuff tendon repair. Knee Surg Sports Traumatol Arthrosc. 2010;18(12):1694-9. https://doi.org/10.1007/s00167-010-1067-7
[13] Ecalle A, Julien C, Chaouche S, Cungi P, Anger F, Galland A, et al. Is routine gleno-humeral exploration a risk factor for adhesive capsulitis after arthroscopic removal of rotator cuff calcifications? A comparative retrospective study in 340 cases. Orthop Traumatol Surg Res. 2021;107(4):102915. https://doi.org/10.1016/j.otsr.2021.102915
[14] Seil R, Litzenburger H, Kohn D, Rupp S. Arthroscopic Treatment of Chronically Painful Calcifying Tendinitis of the Supraspinatus Tendon. Arthroscopy. 2006;22(5):521-7. https://doi.org/10.1016/j.arthro.2006.01.012
Evidence & references
This is the clinical evidence summary written for health professionals. It is technical, and it lists the research this page was built from. You do not need to read it to understand your treatment or to make a decision about it.
Anatomy & Pathophysiology¶
Bony Anatomy¶
- The proximal humerus comprises four main parts: the humeral head, greater tuberosity (GT), lesser tuberosity (LT), and humeral shaft [3].
- The articular head of the humerus is spherical with a diameter of 37 to 57 mm [3].
- The most superior portion of the articular surface of the humeral head averages 8 mm above the greater tuberosity [3].
- Humeral version averages 29.8 degrees, with a range of 10 to 55 degrees [3].
- The humeral head is inclined approximately 130 degrees with respect to the humeral shaft [3].
- The neck-shaft angle measures an average of 135 degrees [4].
- The humeral head is retroverted an average of 30 degrees [4].
- The humeral head averages 19° of retroversion and 41° of inclination (neck-shaft angle) [6].
- The articular surface of the humeral head is essentially spherical, with an arc of approximately 160 degrees covered by articular cartilage [15].
- The radius of curvature of the humeral head is approximately 25 mm and is slightly larger in men than in women [15].
- The average neck-shaft angle is 45 degrees (±5 degrees), with a range of 30 to 50 degrees [15].
- Arthritic shoulders have a flatter neck-shaft angle close to 50 degrees [15].
- The superior margin of the humeral head articular surface is normally superior to the top of the greater tuberosity by 8 to 10 mm [15].
- The distance from the lateral base of the coracoid process to the lateral margin of the greater tuberosity is called the lateral humeral offset [15].
- A significant decrease in lateral humeral offset reduces the lever arms for the deltoid and supraspinatus muscles, weakening abduction and impairing function [15].
- A significant increase in lateral humeral offset causes excessive tension on the soft tissues ("overstuffing" of the joint), resulting in loss of motion and likely accelerating polyethylene wear [15].
- Humeral articular malposition of more than 4 mm leads to increased subacromial contact [15].
- An offset of 8 mm in any direction significantly decreases passive range of motion [15].
- Proximal humeral retroversion is highly variable, ranging from 0 to 55 degrees depending on the method used for measurement [15].
- The glenoid is a convex structure of shallow depth shaped like an inverted pear [3].
- The glenoid cavity is a shallow socket, approximately one third the size of the humeral head [4].
- The subchondral bone of the glenoid is relatively flat; the articular concavity is augmented by cartilage and a circumferential labrum [6].
- The glenoid averages 5° of retroversion in relation to the axis of the scapular body [6].
- The normal position of the glenoid surface in relation to the axis of the scapular body ranges from 2 degrees of anteversion to 7 degrees of retroversion [15].
- The glenoid articular surface radius of curvature is 2 to 3 mm larger than that of the humeral head [15].
- The glenoid diameter ranges from 18-30 mm superior anteroposterior, 21-35 mm inferior anteroposterior, and 30-48 mm superoinferior [15].
- The glenoid inclination averages 4.2 degrees (range –7 to 20 degrees) [15].
- The glenoid version averages 1.5 degrees retroversion (range 10.5-9.5 degrees anteversion) [15].
- The glenoid surface area is 4-6 mm [15].
- The glenoid cartilage thickness is 2.16 mm [15].
- The humeral head surface area is 11-19 mm [15].
- The humeral head cartilage thickness is 1.44 mm [15].
- The humeral head radius of curvature is 23-28 mm, smaller in women than men [15].
- The medial (coronal) humeral offset is 4-14 mm [15].
- The posterior (transverse) humeral offset is –2 to 10 mm [15].
- The scapula is attached to the axial skeleton by the clavicle, specifically via the acromioclavicular (AC) and sternoclavicular (SC) joints [5].
- The scapula is separated from the chest wall by thin gliding fibro-fatty tissue, allowing smooth excursion over the chest wall [5].
- The basic part of the scapula is the body, which is triangular when viewed anteroposteriorly [5].
- The glenoid is connected with the flat body of the scapula by the scapular neck [5].
- The hook-shaped coracoid process curves forwards from the superior surface of the scapular neck [5].
- The scapular spine ends in a flattened bony process, the acromion, which curves forwards [5].
- The highest concentration of bony mass in the scapula is located in the glenoid, the scapular neck (including the base of the coracoid process), and the lateral border of the scapular body [5].
- Two bony pillars transmit compressive forces from the glenoid fossa: the lateral pillar and the spinal pillar [5].
- The lateral pillar connects the inferior border of the glenoid with the inferior angle [5].
- The spinal pillar arises from the central part of the glenoid and continues medially to become part of the base of the scapular spine [5].
- The weakest bone in the scapula is located primarily in the central part of the biomechanical body, specifically in the infraspinous fossa [5].
- The weakest area of the circumference of the biomechanical body of the scapula is the spinomedial angle, which is the connection of the scapular spine and the medial border of the scapula [5].
- The clavicle is the first bone to ossify (fifth week of gestation) and is the only long bone to ossify by intramembranous ossification [6].
- The medial (sternal) epiphysis of the clavicle is the last ossification center to fuse, at age 20 to 25 years [6].
- The primary blood supply to the clavicle is periosteal; no nutrient artery is present [6].
- The acromion has three ossification centers: the metacromion (base), the mesoacromion (middle), and the preacromion (tip) [6].
- Failure of fusion of the acromial ossification centers results in os acromiale [6].
- The proximal humerus has three centers of ossification: the humeral head (4 to 6 months), the greater tuberosity (1 to 3 years), and the lesser tuberosity (3 to 5 years) [6].
- The proximal humeral ossification centers fuse to the shaft at age 17 to 20 years [6].
- The ossification center for the humeral head is usually present at birth [10].
- The greater tuberosity ossification center appears by 1 to 3 years of age [10].
- The lesser tuberosity ossification center appears by 5 years of age [10].
- The proximal humeral ossification center remains separated from the humeral shaft by the proximal humeral physis, which closes by 14 to 17 years of age in girls and by 16 to 18 years in boys [10].
- Humeral retroversion averages 65 degrees in infants and young children and gradually decreases, approaching adult values by 11 years of age [10].
- Eighty percent of subsequent growth of the humerus comes from the proximal humeral physis, accounting for approximately 40% of the growth of the entire upper extremity [10].
- Less than 75% of growth derived from the proximal humerus occurs before 2 years of age [10].
- More than 85% of growth derived from the proximal humerus occurs by 8 years of age [10].
Soft Tissue Anatomy¶
- The greater tuberosity serves as the attachment site for the supraspinatus, infraspinatus, and teres minor tendons of the rotator cuff [3].
- The lesser tuberosity serves as the attachment site for the subscapularis tendon [3].
- The bicipital groove lies between the greater and lesser tuberosities and serves as a pathway for the long head of the biceps [3].
- The distal aspect of the bicipital groove is internally rotated with respect to the proximal portion [3].
- The anatomic neck of the proximal humerus is located at the junction of the articular surface and the tuberosities [3].
- The surgical neck represents an indistinct region (metadiaphyseal junction) below the tuberosities but above the humeral shaft [3].
- The acromion, the coracoacromial ligament, and the coracoid process form the coracoacromial arch [3].
- The rotator cuff, subacromial bursa, and subdeltoid bursa pass underneath the coracoacromial arch [3].
- The rotator cuff consists of four muscles: the subscapularis, supraspinatus, infraspinatus, and teres minor [4].
- The teres major is not a rotator cuff muscle [4].
- The rotator cuff muscles serve as depressors of the humeral head to allow the deltoid to efficiently abduct the humerus [4].
- The infraspinatus and teres minor are external rotators, while the subscapularis is an internal rotator of the humerus [4].
- The rotator cuff is a sheet of conjoined tendons closely applied over the shoulder capsule and inserting mainly into the greater tuberosity of the humerus [11].
- The subscapularis is inserted into the lesser tuberosity [11].
- The coracoacromial arch is formed by the acromion process posterosuperiorly, the coracoid process anteriorly, and the coracoacromial ligament joining them [11].
- The subacromial bursa separates the tendons from the coracoacromial arch, allowing them to glide [11].
- The glenoid labrum is composed of dense fibrocartilaginous tissue and increases the depth of the socket by 50% around the humeral head [16].
- The glenoid articular surface and the labrum combine to create a socket that is approximately 9 mm deep in the superoinferior direction and 5 mm deep in the anteroposterior direction [16].
- Adding the glenoid labrum increases the glenoid surface to 75% of the humeral head vertically and 57% horizontally [16].
- The superior glenohumeral ligament is the primary restraint to inferior humeral subluxation in 0 degrees of abduction [16].
- The superior glenohumeral ligament is the primary stabilizer to anterior and posterior stress in 0 degrees of abduction [16].
- Tightening of the rotator interval decreases posterior and inferior translation [16].
- The middle glenohumeral ligament limits external rotation when the arm is in the lower and middle ranges of abduction but has little effect when the arm is in 90 degrees of abduction [16].
- The inferior glenohumeral ligament is composed of an anterior band that is quite thick, a posterior band that is less thick and distinct, and a thinner intervening axillary pouch [16].
- With external rotation, the inferior glenohumeral ligament hammock slides anteriorly and superiorly, the anterior band tightens, and the posterior band fans out [16].
- With internal rotation, the opposite occurs to the inferior glenohumeral ligament hammock [16].
- The anteroinferior glenohumeral ligament complex is the main stabilizer to anterior and posterior stresses when the shoulder is abducted 45 degrees or more [16].
- The tendons of the infraspinatus and supraspinatus muscles join approximately 15 mm proximal to their insertion and cannot be readily separated by blunt dissection [16].
- The infraspinatus and teres minor fuse near their musculotendinous junctions [16].
- The supraspinatus and subscapularis tendons join as a sheath that surrounds the biceps tendon at the entrance of the bicipital groove [16].
- The roof of the biceps sheath consists of a portion of the supraspinatus tendon, and a sheet of the subscapularis tendon forms the floor [16].
- The coracohumeral ligament is a thick band of fibrous tissue extending from the coracoid process along the surface of the capsule to the tuberosities between the supraspinatus and subscapularis tendons [16].
- The coracohumeral ligament is deep to the tendinous insertion of the cuff and blends with the capsule and supraspinatus tendon to form part of the roof of the biceps sheath [16].
- A 1-cm wide thickening of fibrous tissue extends posteriorly from the coracohumeral ligament origin on the coracoid to the posterior margin [16].
- The subscapular bursa lies between the subscapularis tendon and the neck of the scapula [7].
- The subscapular bursa communicates with the joint cavity between the superior and middle glenohumeral ligaments [7].
- The subscapular bursa protects the tendon of the subscapularis at the point where it passes under the base of the coracoid process and over the neck of the scapula [7].
- In 28% of specimens dissected by Colas and colleagues, the subscapular bursae merged with the subcoracoid bursae, forming a unique wide bursa in this region [7].
- The subscapular bursa often houses loose bodies in the shoulder [7].
- The subscapular bursa is a region in which synovitis of the shoulder may be most intense, where small fringes, or villi, can project into the joint cavity [7].
- Another bursa may be present between the infraspinatus muscle and the capsule, though it is uncommon and not in communication with the joint cavity [7].
- DePalma and colleagues described six common variations or types of recesses in the anterior capsule [7].
- Type 1 recesses (30.2%) have one synovial recess above the middle glenohumeral ligament [7].
- Type 2 recesses (2.0%) have one synovial recess below the middle glenohumeral ligament [7].
- Type 3 recesses (40.6%) have one recess above and one below the middle glenohumeral ligament [7].
- Type 4 recesses (9.0%) have one large recess above the inferior ligament, with the middle glenohumeral ligament being absent [7].
- Type 5 recesses (5.1%) have the middle glenohumeral ligament manifested as two small synovial folds [7].
- Type 6 recesses (11.4%) have no synovial recesses, although all the ligaments are well defined [7].
- The rotator interval is defined medially by the base of the coracoid, superiorly by the supraspinatus tendon, and inferiorly by the subscapularis tendon [6].
- The rotator interval contains the coracohumeral (CH) ligament, the superior glenohumeral ligament (SGHL), and the intra-articular portion of the long head of the biceps tendon [6].
- Laxity of the rotator interval results in inferior laxity (the sulcus sign) [6].
- Contracture of the rotator interval is seen with adhesive capsulitis [6].
- The CH ligament restricts external rotation in adduction [6].
- The CH ligament is a static restraint to inferior and posterior translation in adduction and external rotation [6].
- The SGHL is a primary static restraint against anterior translation with the arm at the side [6].
- With the CH ligament, the SGHL forms a pulley that provides restraint against medial subluxation of the long head of the biceps tendon [6].
- The middle glenohumeral ligament (MGHL) is a primary static restraint against anterior translation with the arm in external rotation and 45° of abduction [6].
- The anterior band of the inferior glenohumeral ligament (AB-IGHL) is a primary static restraint against anterior-inferior dislocation of the glenohumeral joint in 90° of abduction and external rotation (position of apprehension) [6].
- The posterior band of the IGHL (PB-IGHL) is a primary static restraint against posterior-inferior translation in internal rotation and adduction [6].
- The superior transverse scapular ligament arises from the medial base of the coracoid overlying the suprascapular notch [6].
- The suprascapular artery runs superior to the superior transverse scapular ligament; the nerve runs deep to the ligament [6].
- Entrapment of the suprascapular nerve at the superior transverse scapular ligament causes den
Investigations¶
Plain Radiography¶
- The purpose of shoulder imaging is to help establish the diagnosis, determine the severity of the pathoanatomy, assist in surgical planning, and enable the surgeon to illustrate the condition of the shoulder to the patient [2].
- Standardized plain films are almost always sufficient to garner the information needed for shoulder care [2].
- The first key radiographic view is the anteroposterior (AP) view in the plane of the scapula, taken so that the x-ray beam passes through the glenohumeral joint [2].
- The AP view in the plane of the scapula shows the superoinferior position of the humeral head relative to the glenoid, the presence of osteophytes on the humeral head and glenoid, narrowing of the joint space, and the degree of medial displacement of the humerus in relation to the lateral acromial line [2].
- The AP view in the plane of the scapula also shows the quality of the humeral and glenoid bone, the presence of loose bodies, and whether there is humeral head collapse or deformity [2].
- The second key radiographic view is the axillary view taken with the arm in the functional position of elevation in the plane of the scapula [2].
- The axillary view is oriented so that both the spinoglenoid notch and the scapular neck are visible [2].
- The axillary view demonstrates the glenohumeral relationships in the functional position of elevation, a perspective referred to as the "truth view" [2].
- CT scans have the disadvantage of being taken with the arm in the adducted position, unlike the axillary truth view which uses a functional position of elevation [2].
- When taken properly, standardized anteroposterior and axillary views indicate the thickness of the cartilage space between the humerus and the glenoid, relative positions of the humeral head and the glenoid, presence of osteophytes, degree of osteopenia, and extent of bony deformity and erosion [2].
- Joint space narrowing is most evident on the axillary truth view as opposed to images made with the arm at the side [2].
- The standardized axillary view can show posterior subluxation or "functional decentering" that is not evident in images taken with the arm at the side [2].
- The degree of posterior subluxation can be measured by the position of the center of the humeral head in relation to the plane of the scapula, the position of the center of the humeral head in relation to the glenoid face, or the point of contact of the humeral articular surface on the glenoid articular surface [2].
- The point of contact of the humeral articular surface on the glenoid articular surface reflects the degree of centering of the net humeral joint reaction force on the glenoid [2].
- Malcentering of the joint reaction force leads to posterior instability, posterior glenoid wear, and "rocking horse" loosening of prosthetic glenoid components [2].
- At least two X-ray views should be obtained for shoulder imaging: an anteroposterior in the plane of the glenoid and an axillary projection with the arm in abduction to show the relationship of the humeral head to the glenoid [20].
- Conventional radiographs are appropriate for patients presenting with shoulder pain with any history of trauma, dislocation, night pain, or chronic shoulder pain [28].
- The standard shoulder series should include orthogonal views of the shoulder, including a true AP view in the scapular plane, an AP view, an axillary view, and a scapular Y view [28].
- The true AP view in the scapular plane visualizes the anterior greater tuberosity in profile and can reveal proximal humeral migration when the arm is held in neutral rotation with slight abduction [28].
- The AP view with the arm in internal rotation visualizes the posterior aspect of the greater tuberosity and the lesser tuberosity in profile [28].
- The axillary view is necessary for evaluation of glenohumeral joint instability and enables determination of the humeral head position in the glenoid fossa [28].
- The axillary view may detect occult, locked posterior shoulder dislocation in a patient who exhibits a lack of passive external rotation [28].
- The scapular Y view provides visualization of the coracoacromial arch and can reveal coracoacromial spurs associated with rotator cuff pathology [28].
- The scapular Y view is a reliable alternative for evaluation of glenohumeral subluxation and dislocation and can show scapular body abnormalities and acromial shape [28].
- The acromiohumeral distance is normally 7 to 14 mm [28].
- The width of the glenohumeral joint space should be symmetric superiorly and inferiorly [28].
- The coracoclavicular distance is normally 1.1 to 1.3 cm [28].
- Neer classified acromial morphology as type I (flat), type II (curved), and type III (hooked) [28].
- Type III acromial morphology has been shown to have a correlation with the presence of rotator cuff disease, although no direct causal relationship has been demonstrated [28].
- Arthritis, calcific tendinitis, and osteolysis of the distal clavicle can be observed on plain radiograph [27].
Computed Tomography¶
- CT scans may offer a few degrees of increased precision in the measurement of glenoid version, but this precision does not necessarily improve the quality of the surgery or the clinical outcome [2].
- CT imaging is frequently used to evaluate fractures of the shoulder, to assess for bony lesions in recurrent instability cases, or for preoperative templating for shoulder arthritis [27].
- CT with three-dimensional reconstructions is the advanced imaging study of choice for determining the extent of glenoid bone loss in the setting of shoulder instability [28].
- Three-dimensional reconstructions can reveal fine details of the shoulder anatomy, but this additional information rarely changes the planning or conduct of the arthroplasty [2].
- CT is helpful for planning fracture surgery and shoulder joint replacement [20].
Magnetic Resonance Imaging¶
- Magnetic resonance imaging (MRI) is useful to identify osteonecrosis of the humeral head, or a bone tumour [20].
- MRI can identify labral tears and rotator cuff tears, although the accuracy for these is enhanced by combining the scan with arthrography [20].
- MRI is the modality of choice for evaluating the rotator cuff, biceps, and subacromial/subdeltoid bursa [27].
- T1-weighted MRI can reveal Hill-Sachs lesions and is often used with magnetic resonance (MR) arthrograms to provide a more detailed picture of the joint surfaces [27].
- T2-weighted MRI provides better visualization of full thickness rotator cuff tears [27].
- Traditional MRI is utilized for evaluation of soft tissues with high contrast and spatial resolution in the management of patients with anterior shoulder instability [25].
- MR accuracy in identifying labral and rotator cuff tears in the literature ranges from 70% to 100% [25].
- The acquired multi-planar imaging of MRI allows for the detailed evaluation of the glenoid, labrum, joint capsule, and rotator cuff in different planes [25].
- With standard MRI or MRA, the shoulder is routinely positioned in neutral or partial external rotation, but other alternative positions can be used to increase the sensitivity for detecting labroligamentous injuries [25].
- Abduction and external rotation (ABER) of the arm is an alternative position utilized to increase the sensitivity and specificity for detecting anteroinferior labroligamentous injury [25].
- Limited range of motion or pain may prohibit patients from performing the ABER provocative maneuver [25].
- Full routine MRI or MRA examination had similar accuracy as the ABER sequence in evaluating the anteroinferior labral–ligamentous complex according to a retrospective study by Schreinemachers et al. [25].
- The sensitivity of MRA with the ABER position for detecting anteroinferior labral lesions was significantly higher than that of the MRA in neutral position and more effective in identifying Perthes lesions according to a study by Tian et al. [25].
- MRAs can demonstrate a patulous capsule on the coronal, sagittal, and axial imaging in patients with multidirectional instability [25].
- MRAs can be helpful in evaluating lesions of the rotator interval and other associated findings that may affect the eventual surgical plan [25].
- The presence of glenoid dysplasia, increased capsular cross-sectional area, and increased glenoid retroversion have all been found to be associated with increased posterior labral tears and symptomatic instability [25].
- Glenoid retroversion was significantly increased in patients with symptomatic posterior labral tears, but there was no significant association between instability and increased humeral head subluxation [25].
- The diagnosis of multidirectional instability is a clinical one, and the need for expensive and/or invasive imaging should be weighed against the information that will be gained from these studies [25].
Magnetic Resonance Arthrography¶
- Magnetic resonance arthrography (MRA) refers to MRI of a joint that has been injected with an intra-articular contrast agent such as diluted gadolinium or saline solution [25].
- The contrast material for MRA is injected prior to MRI by fluoroscopic or ultrasound guidance under strict aseptic technique [25].
- By distending the joint capsule, the cartilage, ligaments, and labrum are outlined with contrast, increasing the sensitivity for detecting tears and other lesions [25].
- In the acute dislocation setting, a joint effusion with distension of the joint may outline structures similarly, making the arthrogram unnecessary [25].
- MRA has proven utility by increasing both sensitivity and specificity in detecting injuries to the capsulolabral–ligamentous complex as compared to traditional MRI [25].
- In a meta-analysis of 6 studies including 4,667 shoulders, MRA had greater diagnostic test accuracy for the detection of glenoid labral lesions than MRI, with MRA sensitivity of 88% and specificity of 93% versus MRI sensitivity of 76% and specificity of 87% [25].
- Arthrography involves injection of contrast agent in conjunction with either an MRI or CT scan, enhancing imaging of the joint to enable better identification of normal structures and pathology involving the joint surfaces [27].
- MR arthrography is considered the benchmark for evaluation for labral tears and rarely is indicated for evaluation of rotator cuff pathology [27].
- When MRI or MR arthrography is contraindicated, such as in patients with a pacemaker or vascular clips, CT arthrography is indicated [27].
Ultrasonography¶
- Ultrasonography is a simple and accurate test for identifying rotator cuff tears and calcific tendinitis [20].
- Ultrasonography can be useful in guiding injections or barbotage, which involves aspirating calcific deposits in the rotator cuff [20].
- Ultrasonography is a low-cost alternative to MRI and arthrography for evaluating both skeletal and soft-tissue structures of the shoulder [27].
- Ultrasonography can provide immediate, real-time visualization of the rotator cuff, biceps tendon, and calcific deposits [27].
- Ultrasonography can be used to measure the subacromial space and detect atrophy of rotator cuff muscles [27].
- As a result of providing images in real-time, ultrasonography can evaluate impingement in various positions and motions [27].
- Ultrasonography is highly operator dependent and is not as useful for evaluating labral tears or rotator cuff tears that are very small or larger than 3 cm [27].
- The most commonly performed joint examination using ultrasonography is the shoulder examination [18].
- Accuracy of shoulder ultrasonography depends on the skill of the scanner operator and an awareness of pitfalls that are encountered [18].
- In a study of 147 patients with rotator cuff calcific tendinitis treated with ultrasonography-guided lavage, 70% of shoulders resulted in significant reduction of symptoms [18].
- Calcifications that were softer and middle-sized (12 to 17 mm) had more significant improvement in the study of ultrasonography-guided lavage for rotator cuff calcific tendinitis [18].
- Better results occurred in patients aged 30 to 40 years in the study of ultrasonography-guided lavage for rotator cuff calcific tendinitis [18].
- The sensitivity of ultrasonography for the detection of full-thickness rotator cuff tears is 98% [28].
- The specificity of ultrasonography for the detection of full-thickness rotator cuff tears is 80% [28].
- The positive predictive value of ultrasonography for the detection of full-thickness rotator cuff tears is 90% [28].
- The negative predictive value of ultrasonography for the detection of full-thickness rotator cuff tears is 95% [28].
- The accuracy of ultrasonography for the detection of full-thickness rotator cuff tears is 94% [28].
- The sensitivity of MRI for the detection of full-thickness rotator cuff tears is 100% [28].
- The specificity of MRI for the detection of full-thickness rotator cuff tears is 68% [28].
- The positive predictive value of MRI for the detection of full-thickness rotator cuff tears is 85% [28].
- The negative predictive value of MRI for the detection of full-thickness rotator cuff tears is 100% [28].
- The accuracy of MRI for the detection of full-thickness rotator cuff tears is 89% [28].
General Imaging Principles¶
- The diagnosis of a stiff shoulder depends on awareness of the problem, with history and physical examination being paramount and ancillary studies helpful in certain circumstances [1].
- Unless a specific research protocol is in place, the temptation to "overimage" should be resisted, obtaining only the scans or reconstructions that are necessary for the care of the patient [2].
- Proper radiographic technique is as important as proper surgical technique to achieve the desired outcome [2].
- A robust approach to imaging the shoulder needs to recognize that the shoulder is a three-dimensional structure that cannot be represented by a single planar view [23].
- Critical relationships, such as the degree of centering of the humeral head, change with the position of the arm [23].
- Shoulder pathology may be found in a large number of different bones and soft tissues [23].
- Overlying and superimposed structures as well as metallic implants may complicate imaging the structures of interest [23].
- Surgeons need to develop a judicious approach to imaging that yields the information necessary to treat the patient while avoiding the tendency to "over-image" [23].
References¶
[1] Rockwood And Matsen S The Shoulder. Arthroscopic Management of Prearthritic and Arthritic Conditions of the Shoulder and the Postarthroplasty Shoulder > SUMMARY.
[2] Rockwood And Matsen S The Shoulder. Arthroscopic Management of Prearthritic and Arthritic Conditions of the Shoulder and the Postarthroplasty Shoulder > Radiographic Evaluation.
[3] Rockwood And Matsen S The Shoulder. Shoulder and Elbow Specialty Clinic Workers’ Survey > ANATOMY.
[4] A Lange Medical Book Current Diagnosis Treatment In Orthopedics Fifth Edition. 2Musculoskeletal Trauma Surgery > SHOULDER AND ARM INJURIES.
[5] Rockwood And Green S Fractures In Adults. 29: Principles of Nonunion and Bone Defect Treatment > Applied Anatomy Related to Scapular Fractures.
[6] Aaos Comprehensive Orthopaedic Review 3. Anatomy of the Shoulder, Arm, and Elbow > I. Shoulder.
[7] Rockwood And Matsen S The Shoulder. Developmental Anatomy of the Shoulder and Anatomy of the Glenohumeral Joint > Bursae.
[10] Rockwood And Matsen S The Shoulder. Fractures, Dislocations, and Acquired Problems of the Shoulder in Children > FRACTURES OF THE PROXIMAL HUMERUS.
[11] Apley And Solomon S Concise System Of Orthopaedics And Trauma. DISORDERS OF THE ROTATOR CUFF.
[15] Campbell S Operative Orthopaedics 4 Volume Set. RECONSTRUCTIVE PROCEDURES OF THE SHOULDER AND ELBOW IN ADULTS > ANATOMY AND BIOMECHANICS.
[16] Campbell S Operative Orthopaedics 4 Volume Set. ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION WITH BONE-PATELLAR TENDON-BONE GRAFT > SHOULDER INJURIES > ANATOMY AND BIOMECHANICS.
[18] Orthopaedic Knowledge Update Sports Medicine 6. Diagnostic Ultrasonography and Ultrasonography-Guided Procedures > Annotated References.
[20] Apley And Solomon S Concise System Of Orthopaedics And Trauma. INVESTIGATION.
[23] Rockwood And Matsen S The Shoulder. Developmental Anatomy of the Shoulder and Anatomy of the Glenohumeral Joint > SENIOR EDITOR COMMENTARY.
[25] Rockwood And Green S Fractures In Adults. 29: Principles of Nonunion and Bone Defect Treatment > Magnetic Resonance Imaging and Arthrography.
[27] Orthopaedic Knowledge Update 13 Ebook Without Multimedia. Shoulder Anatomy and Biomechanics, Clinical Evaluation, Imaging > Clinical Evaluation > Imaging.
[28] Aaos Comprehensive Orthopaedic Review 3. Imaging of the Shoulder and Elbow > I. Shoulder.